 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Machines | |||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
| Welbound Cream | |||||||||||||||||||||||||||||||||||||
| |
|||||||||||||||||||||||||||||||||||||
| Unique
Features Supported :
|
|||||||||||||||||||||||||||||||||||||
| Book Carriage (clamps) : | |||||||||||||||||||||||||||||||||||||
 Gathered
Signatures Or Formes are fed manually into the Book Carriage.
They can be Jogged before clamps close, automatically. The moment
the formes are clamped and cover placed, Book & Cover Sensors
puts the binding cycle into operation. For 2 - Up Production
a book guide is placed between the clamps that divides the carriage
into two equal compartments. A book-support can be attached
if the width of the book is much more than the clamp height
|
|||||||||||||||||||||||||||||||||||||
| Back Milling Station : | |||||||||||||||||||||||||||||||||||||
 A
TCT Milling Cutter with Scoring teeth are housed at the Milling
Station. The front (safety) plate covering the cutter slides
back as the signatures come on top of that . This avoids any
setting required based on thickness of spine. A lever is provided
for increasing or decreasing the depth of back milling. For
Pad binding the Milling Cutter can be replaced with a Grinding
Disc. |
|||||||||||||||||||||||||||||||||||||
| Dust Extraction System : | |||||||||||||||||||||||||||||||||||||
| A Powerful, Separate Suction Device is provided for the efficient removal of Milling dust into a bag type collector. |
|||||||||||||||||||||||||||||||||||||
| Hot Melt Glueing Station : | |||||||||||||||||||||||||||||||||||||
 The
Hot Melt Applicator is Roller Type and Thickness of Glue Film
is adjusted, accurately, by a Scraper System. 3 Separate Strip
Heaters are provided, which are controlled by Digital Circuits
for accurately maintain the application Temperature. The heater
can be set to go ON at a pre determined time, in order to avoid
delays in Melting the Adhesive. |
|||||||||||||||||||||||||||||||||||||
| Cover Station : | |||||||||||||||||||||||||||||||||||||
 Cover
are Fed manually at the cover station, against Side and Back
Readys for Registration against the book back. The Duration
of Nipping can be controlled, from the control panel to suit
the thickness of the book and the cover. The Reference Height
of the Cover Breaker or the Centre plate can be lowered or raised
to adjust the cover breaking pressure |
|||||||||||||||||||||||||||||||||||||
| Delivery Station : | |||||||||||||||||||||||||||||||||||||
| The books are delivered through a Chute Type Tray and the book carriage goes back only after delivering the book. (Delivery Sensing). |
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
| Request
a Product Brochure Click here to get a brochure of Welbound Cream |
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
top |
|||||||||||||||||||||||||||||||||||||
